Forging Small Parts are objects in which the metal is pressed to shape the desired shape or suitable compressive force by plastic deformation. This force is typically achieved by using a hammer or pressure. The forging process creates a refined grain structure and improves the physical properties of the metal. In the practical use of components, a correct design enables the particles to flow in the direction of the main pressure.

Features

Forging process can ensure the continuity of metal fiber structure, make the fiber structure of Forging Small Parts consistent with the shape of the forging, and the metal flow line is complete, which can ensure the good mechanical properties and long service life of the parts.

Parameter

Weight range: 5-3000kgs

Capacity:max diameter:1M, max weight:200KG

Tolerance:casting:0.5mm, machining:0.05mm, finish machining:0.005mm

Material Control

Pre-Control: sand analyzer/ CE rapid analyzer/ automatic feeding system/ wire feeding spheroidization.

After-Control: spectrometer analyzer/ metallurgical structure analyzer/ Lab chemical analysis/ tensile strength test/ hardness test/ impact test.

Nondestructive testing can be made if required, including magnetic particle testing, ultrasonic testing and x-ray detection.

Dimensional Check

CMM, optical comparator, height tester, surface roughness tester, thread gauge, functional gauge and so on.